1
2
3
4
5
6
7
8

ABSTRACT SUBMISSION

Deadline for Abstract Submission October 15, 2020

Before completing this page, be fully aware of the Code Number of each Session/Sub-session specific to the Symposium of interest.
 

Presenting Author information
(contacts by Conference Secretariat will be held with the Presenting Author only)

Please fill all bold fields of the form for your abstract to be delivered.
Please follow the instructions included in the
ABSTRACT INSTRUCTIONS FOR ON-LINE SUBMISSION

Only one abstract may be submitted by the same Presenting Author. 



  Dr.   Prof.   Ms.   Mr.  

Select Symposium Session

15th Ceramics Congress


CA-1 - Advances in conventional powder processing routes
CA-2 - Solution-based processing of functional materials
CA-3 - Polymer-derived ceramics
CA-4 - Microwave processing
CA-5 - Novel sintering approaches - Spark Plasma, Flash Sintering, Cold Sintering, Laser Sintering
CA-6 - Electrophoretic forming
CA-7 - Additive manufacturing
CA-8 - Other special processing routes
Focused Session CA-9 - Bio-inspired and Bio-enabled Processing
Focused Session CA-10
Functionally Graded Materials
Focused Session CA-10 - Functionally Graded Materials
Focused Session CA-11
SHS Ceramics
CA-11.1 - Theory and modeling of SHS processes and structural transformations
CA-11.2 - SHS of powders from the micro- to nano-scale. Consolidation of the SHS-powders (sintering, HP, SPS, HIP, etc.)
CA-11.3 - SHS of bulk materials (functional and structural ceramics, composites, metal/ceramic composites, foams…)
CA-11.4 - Solution combustion synthesis of ceramic nanopowders and materials
CA-11.5 - Application and industrialization
CA-12.1 - Nano-scale interface of dissimilar materials and micro-/nano-joining
CA-12.2 - Macro-joining
CA-12.3 - Application engineering
CB-1 - Virtual Materials Design and Evaluation
CB-2 - High-throughput Characterization and Testing
CB-3 - Big Data Methodologies and Integration of Information Technology
CB-4 - Machine Learning and Artificial Intelligence
CB-5 - Next Generation Smart Manufacturing
CB-6 - Big Data and Sustainable Societal Development
CB-7.1 - Automation of stereological techniques to characterize microstructure
CB-7.2 - Data analysis for quantitative description of microstructure (i.e. multi-point methods, primary component analysis, spectral methods, etc.)
CB-7.3 - Machine learning to recognize microstructural features and quantify microstructures
CB-7.4 - Development of long-range descriptors (i.e. spatial correlation, hierarchical relations)
CB-7.5 - Application of data analytics or machine learning to find processing-microstructure or microstructure-property relationships
CC-1 - Bulk (dense/porous) ceramic materials and components
CC-2 - Thick coating, thin films
CC-3 - Particulate, fibre, nanomaterial reinforced CMCs and MMCs, including laminated and sandwich structures
CC-4 - Graded/hybrid materials and components
CD-1 - Synthesis and processing
CD-2 - Corrosion, oxidation, and testing
CD-3 - Mechanical, thermal and optical properties
CD-4 - Characterization, analysis, and simulation
CE-1 - New MAX/MAB/MXenes
CE-2 - Synthesis and fabrication of MAX/MAB/MXenes
CE-3 - Mechanical and oxidation properties of the MAX/MAB/MXenes
CE-4 - MAX/MAB and MXene composites and their properties
CE-5 - ab initio calculations, electronic and magnetic properties
CE-6 - Functional properties of MAX/MAB/MXenes
CE-7 - Applications of the MAX/MAB and MXene phases
CF-1 - Innovative processing of nano- and heterostructured functional materials
CF-2 - Functional metal oxide nano- and heterostructures for photovoltaics and solar fuels
CF-3 - Recent developments in photovoltaic materials
CG-1 - Advances in deposition, surface modification and characterisation techniques
CG-2 - High temperature protective coatings in corroding, oxidising and harsh environments
CG-3 - Thermal and environmental barrier coatings
CG-4 - Tribological thin films and coatings
CG-5 - Smart and multifunctional thin films and coatings
CG-6 - Modelling and simulation of coatings and films
CH-1 - Novel processing and synthesis of porous ceramics (nano to macro), including Additive Manufacturing
CH-2 - Adsorption, capillary phenomena, molecular thermodynamics of fluids and intermolecular interactions within the porous network
CH-3 - Structure and functional, mechanical and thermal properties of porous ceramics; structure/transport/functional properties relationships
CH-4 - Advances in the characterization of the porous structure (adsorption and intrusion porosimetry, thermophotometry, high resolution microscopy, image analysis, scattering techniques, computed tomography, etc.)
CH-5 - Modeling and simulation of porous structure and properties
CH-6 - Progress in applications of porous ceramics
CI-1 - Dielectrics and microwave materials
CI-2 - Ferroelectric, piezoelectric, pyroelectric, and ferroelastic ceramics
CI-3 - Multiferroics and magnetoelectric ceramics
CI-4 - Semiconducting and fast ion-conducting ceramics
CJ-1 - Batteries
CJ-2 - Supercapacitors
CK-1 - High temperature solid oxide fuel cells
CK-2 - Intermediate temperature solid oxide fuel cells
CK-3 - New frontiers in solid oxide fuel cell
CK-4 - SOFC cells, stack design and system demonstration
CK-5 - Modelling of SOFC materials, processes and devices
CL-1 - Photonic nanomaterials and nanostructures
CL-2 - Luminescent and chromogenic ceramics and glass systems
CL-3 - Electro-optical and magneto-optical materials
CL-4 - Laser materials
CL-5 - Inorganic optical fibers
CL-6 - Photons management
CL-7 - Advances in characterization techniques
CL-8 - Ongoing applications and forecasts
CM-1 - Fundamentals
CM-2 - Material design and device development
CM-3 - Applications
CN-1 - Processing and Microstructure
CN-2 - Properties
CN-3 - Structural and Functional Applications
CN-4 - Definitions of geopolymers and alkali activated materials
CO-1 - Green and sustainable silicate ceramics
CO-2 - Coating and decoration of silicate ceramics
CO-3 - Innovative processing and smart silicate ceramics
CP-1 - Raw materials needs
CP-2 - Product testing and quality control
CP-3 - Specialized refractory use / issues
CP-4 - Modelling and simulation of the process environment
CP-5 - Refractory failure analysis
CP-6 - Refractory materials for novel or advanced applications
CP-7 - Future refractory testing and refractory education needs (refractory producers, users, and industry)
CQ-1 - Production and properties of reinforcements, preforms, and matrix materials
CQ-2 - Interfaces / Interphases
CQ-3 - Processing and fabrication of MMCS, CMCS, and C/C composites
CQ-4 - Property, modeling and characterization
CQ-5 - Composites for thermal management
CQ-6 - Applications
CR - 9th International Conference
Science and Engineering of Novel Superconductors
CR-1 - Materials, structure, physical chemistry and general properties
CR-2 - New superconductors of the pnictides and related families
CR-3 - Properties of superconductors (of any type)
CR-4 - Theory mechanisms and vortex lattice physics
CR-5 - Synthesis, processing, applications


9th Forum on New Materials


FA-1 - Additive manufacturing of ceramics and composites
FA-2 - Additive manufacturing of polymeric, metallic and multi-material structures
FA-3 - Applications of 3D Printing technologies
FA-4 / FQ-8 - 3D Bioprinting of Soft Tissues and Organs
FB-1 - Materials and fabrication processes
FB-2 - Device physics, mechanics and design
FB-3 - Applications of flexible/stretchable electronics
FC-1 - Physical MEMS/NEMS
FC-2 - Chemical micro/nano-sensors and systems
FC-3 - Smart micro-nano systems and components integration
FC-4 - Radio frequency MEMS
FC-5 - Energy harvesting and power supply MEMS
FC-6 - Micro(nano)fluidics and Lab on Chip
FD-1 - Theory and modeling of single phase and composite multiferroics
FD-2 - Non-oxide, organic-inorganic and 5-d oxide multiferroics
FD-3 - Advances in materials synthesis and processing
FD-4 - Multiferroic nanostructures, self-assembly and nanocomposites
FD-5 - Magnetoelectric characterization and electric field control of magnetization
FD-6 - Domain walls and dynamics of multiferroics
FD-7 - New effects
FD-8 - Devices and applications
FE-1 - Carbon nanostructures (CNTs, graphene)-based gas sensors
FE-2 - Semiconductor metal oxides-based gas sensors
FE-3 - Novel 2D inorganic materials-based gas sensors
FE-4 - Enzyme-free sensors based on functional nanomaterials
FE-5 - Nanocomposite/hybrid/heterostructure-based chemical- and bio-sensors
FF-1 - Physics and modelling of metamaterials / metadevices
FF-2 - Novel concepts and new materials
FF-3 - Mie-resonant nanophotonics
FF-4 - Functional metasurfaces
FF-5 - Quantum and topological meta-optics
FF-6 - Active metamaterials
FG-1 - Physics and modelling of luminescent materials
FG-2 - Phosphors, quantum dots and low dimensional materials for lighting and displays
FG-3 - Advances in scintillator development and upconversion materials
FG-4 - Sensing and imaging
FG-5 - Chemi-, bio-, sono-, thermo- and mechano-luminescence
FG-6 - Light management for active applications and luminescent materials integration in devices
FG-7 - Medical applications and bioimaging
FH-1 - Resistance switching (RRAM) and Phase Change (PCM) Memories
FH-2 - Magnetic, ferroelectric and multiferroic materials for memory devices
FH-3 - Emerging applications for non-volatile memories and memristive devices
FI-1 - General physical and chemical properties, structural and electronic characterization of graphene, graphene oxide and of single and few-layered 2D compounds: such as nitrides, oxides, dichalcogenides, silicene, MXenes, 2D polymers…..
FI-2 - Novel properties including spin, spin-orbit, magnetic, superconducting, thermal, thermoelectric, piezoelectric, excitonic, catalysis-related etc.
FI-3 - Synthesis, processing of graphene and other 2D layered compounds and their nanostructures
FI-4 - Integration processes of graphene and other 2D layered materials in devices structures
FI-5 - Novel characterizations routes such as high-resolution imaging, chemical/spectro-scopic analysis, ultrafast methods, in-situ approaches or properties under extreme conditions, new computational approaches, 2D materials by design including genomic approaches
FI-6 - Application of graphene and other 2D layered materials and composites
FJ-1 - Design elements and advanced concepts for photofunctional materials
FJ-2 - Understanding fundaments of photoinduced processes and charge transport
FJ-3 - Design approaches for advanced applications
FK-1 - Thermoelectric Materials Research & Characterization
FK-2 - Solid-State Device Research and Modeling
FK-3 - Converter Technologies and Applications
FL-1 - Shape-memory polymers and actuators
FL-2 - Degradable, stimuli-sensitive polymers
FL-3 - Stimuli-sensitive gels
FL-4 - Multifunctional (nano)composites and multi-material systems
FL-5 - Multifunctional surfaces
FL-6 - Multifunctional polymer systems for energy storage and flexible electronics
FL-7 - Pharmaceutical and medical applications of smart polymers
FL-8 - Additive manufacturing for multifunctional materials
FL-9 - Multifunctional materials for soft robotics
FM-1 - Materials and materials design
FM-2 - Basic phenomena and theory
FM-3 - Functional properties
FM-4 - Thin films and micro nano-systems
FM-5 - Applications
FN-1 - Adaptive/Active Textiles
FN-2 - e-Textiles
FN-3 - Functionality, Manufacturing, Application
FO-1 - Smart Materials/Sensors/Actuators/MEMS/NEMS
FO-2 - Integration Technologies
FO-3 - Smart Structures and Integrated Systems
FO-4 - Ongoing and Perspective Applications
Special Session FO-5 - "Autonomic, Adaptive and Self-Sustaining Systems"
FP-1 - Classes of materials and their (bio)synthesis, structure and chemical modification
FP-2 - Electronic devices with biological and bio-inspired materials
FP-3 - Photonic devices with biological and bio-inspired materials
FP-4 - Bio-medical devices with biological and bio-inspired materials
FQ-1 - Advances in biomaterials: synthesis, processing, characterization, functionalization, finalization
FQ-2 - Tissue engineering and regenerative medicine
FQ-3 - New therapeutics and intelligent drug/biomolecule/gene delivery systems
FQ-4 - Bio-imaging and theranostics
FQ-5 - Clinical translations
Focused Session FQ-6 - Next Generation Implantable Neural Interfaces
New Developments in Materials and Technology
Focused Session FQ-7 - Wireless Body Sensor Networks for Healthcare Applications
Focused Session FQ-8 - 3D Bioprinting of Soft Tissues and Organs

Presentation preference

Oral      Poster



(Maximum characters: 1300). You have characters left.

 I authorise the processing of my personal data

Cimtec 2021

Copyright © Techna Group S.r.l.
C.F.-P.I. 03368230409
Privacy Policy - Cookie Policy - Software Commercio Elettronico by Pianetaitalia.com